Sony UPX-DP10 Mode D'emploi page 40

Connections
Connecting the camera to the station with a cable
Camera
40
You can connect the camera to the station with the supplied connecting
cable. Connect the RS-232C connector on the camera and the CAMERA
connector on the station.
If the ferrite filters are not attached to the cable, attach the supplied filters
to the plugs as illustrated below.
Note
The camera should not be mounted to the station with the connecting cable
connected.
Station
CAMERA
H
F L A S
A S E
R E L E
T
O O U
V ID E
RS-232C
3 2 C
R S -2
V IN
D C 8 .4
Ferrite filter
Attaching the ferrite filters
Release the lock of the ferrite filter with a screwdriver or a similar tool,
and attach it to the plug.
Ferrite filter
C A M
E R A
Ferrite filter
Connecting cable (supplied)