Color Guide Function - Sony UPX-DP10 Mode D'emploi

Picture Quality Adjustment

Color Guide Function

In the menu operation of the picture quality
adjustment, pressing the EXEC button calls the color
guide screen. When you have made color adjustments,
the color guide screen is shown after the "SAVE
SETTING" screen. When you have not yet made color
adjustments, the color guide screen is shown directly.
Initially, "COLOR GUIDE:0" is shown in the top row
and CANCEL is shown in the bottom row. The guide
function is disabled in this state.
COLOR GUIDE: 1
UPX-DP10
Adjustment of
(RED, GRN, BLU)
DARK = 0
LIGHT = 0
GAMMA = 0
B + 3 : = (0, 0, +3)
R - 3 : = (-3, 0, 0)
G + 3 : = (0, +3, 0)
Color guide for RGB
parameter adjustment
72
G - 3 : = (0, -3, 0)
-
now : = (0, 0, 0) R + 3 : = (+3, 0, 0)
B - 3 : = (0, 0, -3)
g
Pressing the key changes the indication to "COLOR
GUIDE:1," which means a guide for changing the
RGB parameters. To print this color guide, press the
EXEC button at this point. Pressing the
again changes the indication to "COLOR GUIDE:2,"
which means a guide for changing the DLGm
parameters. To print this color guide, press the EXEC
button at this point.
The figure below gives examples of the color guides.
COLOR GUIDE: 2
D + 3 : = (+3, 0, 0) L + 3 : = (0, +3, 0) Gm + 3 : = (0, 0, +3)
UPX-DP10
Adjustment of
(DARK, LIGHT, GAMMA)
RED (CYN) = 0
GRN (MAG) = 0
BLU (YLW) = 0
now : = (0, 0, 0)
D - 3 : = (-3, 0, 0) L - 3 : = (0, –3, 0) Gm - 3 : = (0, 0, -3)
Color guide for DLGm
parameter adjustment
g
key once
-
-
-