Showing Frame Lines - Sony UPX-DP10 Mode D'emploi

Showing Frame Lines

You may choose to view frame lines on the LCD while
you shoot a subject. Use the frame lines as rough
guidelines for the position or size of the subject.
Basically, the camera shows one vertical line (center
line) and two horizontal lines (at the levels of the head
and chin).
H/S mode FRAME-1
480
S mode
(VGA)
1 2
960
Hi-1 mode
Hi-2 mode
(SXGA)
1 2
FRAME-1
When the SPLIT mode on the station is set to 4 or 6,
the distance between the head and chin lines is 27 mm.
FRAME-2
In FRAME-2 mode, two chin lines are shown.
When the SPLIT mode on the station is set to 4 or 6,
the distances between the head and chin lines is 1 inch
3
and 1 / inches.
8
FRAME-3
When the SPLIT mode on the station is set to 4 or 6,
the distance between the head and chin lines is 28.5
mm.
FRAME-4
When the SPLIT mode on the station is set to 4 or 6,
the distance between the head and chin lines is 22 mm.
FRAME-2
480
3 4 1 2 3
960
3 4 1 2 3
FRAME-3
480
4 1 2 3
960
4 1 2 3
FRAME-4
480
1 2 3
4
960
1 2 3
4
4
4
67