Print Tab; Print Color Tab - Sony SnapLab UP-CR10L Mode D'emploi

[Position] tab
Lets you specify where in the image the text should be
placed.
[Color] tab
Lets you specify the text color.
Note
Depending on the number of characters and text size
selected, it may not be possible to print the entire text in
some cases.

Print Tab

Order Numbering
Select one of the following settings related to including the
order number on the prints.
• OFF
No order number is printed.
• (Print all)
The order number is printed on all photos.
• (Print first only)
The order number is printed on the first image of each
order. If you print multiple copies of the first image, the
order number is printed on each copy.
The order number is printed as a watermark on the edge of
the photo.
Date Print Format
Specifies the format that is used when including the date in
the printout.
• YYYYMMDD (Example: 2005/10/30)
• DDMMYYYY (Example: 30/10/2005)
• MonthDDYY (Example: Oct/30/05)
• MMDDYYYY (Example: 10/30/2005)
24
Setting Items
Print position adjustment
If the print is not properly centered on the paper, you can
adjust the position in the X (horizontal) and Y (vertical)
direction. The adjustment range is ±2 mm in each
direction.
Increase
the X value

Print Color Tab

Various settings related to print color and quality can be
made here. Each item is set with the [b] and [B] buttons.
The setting range is ±16 in steps of 2.
Red, Green, Blue
Adjusts the color component of the respective color.
Dark, Light
Adjusts gradation in dark and light sections.
Gamma
Adjusts the halftone density.
Decrease
the Y value
Decrease
the X value
Increase
the Y value