Warnings: Important Information For Users - KCI CelluTome Système de prélèvement de cellules épidermiques Manuel D'utilisation

WARNINGS: IMPORTANT INFORMATION FOR USERS

In order for KCI products to perform properly, KCI recommends the following conditions. Failure to comply
with these conditions will void any applicable warranties.
•
Use this product only in accordance with this manual and applicable product labeling.
•
Do not modify the control unit or vacuum head. Do not connect the control unit or vacuum head to
other devices that may be in use.
•
Assembly, operations, extensions, re-adjustments, modifications, technical maintenance or repairs
must be performed by qualified personnel authorized by KCI. For these authorized personnel, KCI
will make available upon request circuit diagrams, component parts lists, etc. as required for repairs.
•
Ensure the electrical installation of the room complies with the appropriate national electrical wiring
standards. To avoid the risk of electrical shock, this product must be connected to a grounded
power receptacle.
•
Do not operate this product if it has a damaged power cord or plug. If these components are worn
or damaged, contact KCI.
•
Do not drop or insert any object into any opening or tubing of this product.
•
Do not connect this product or its components to devices not recommended by KCI.
•
Only use accessories and harvesters provided with this product.
•
Keep this product away from heated surfaces.
•
Although this product conforms to the intent of the standard IEC 60601-1-2 in relation to
Electromagnetic Compatibility, electrical equipment, including cell phones or similar products, may
produce interference. If interference is suspected, separate the equipment and contact KCI.
•
Avoid spilling fluids on any part of this product.
WARNING: Fluids remaining on the electronic controls can cause corrosion that may
cause the electronic components to fail. Component failures may cause the unit to
operate erratically, possibly producing potential hazards to patient and staff. If spills do
occur, unplug the unit immediately and clean with an absorbent cloth.
•
Ensure there is no moisture in or near the power connection and power supply components before
reconnecting power. If the product does not work properly, contact KCI.
•
Refer to the Care and Cleaning section of this manual for information on infection control.
Notice
This product has been configured from the manufacturer to meet specific voltage requirements. Refer to
the product information label for specific voltage.
9