Number Plate Light - Malaguti Madison3 125ie Manuel D'utilisation Et D'entretien

5.14.4 NUMBER PLATE LIGHT

• Number plate light (C - Fig. 41)
Bulb 12V - 5W (W5W)
To check if number plate light (C - Fig. 41) is working properly,
flick the light switch, which is on the right-hand side control, to
its central position and turn the key to starting position.
Fig. 41
Replacing number plate light
To replace number plate light:
• Remove rubber lamp socket (P - Fig. 42) that can be accessed
through slot on rear mudguard.
• Replace light bulb.
• Refit lamp socket.
When performing the operations described above, pay
attention not to damage parts nearby (transmission, wir-
ing, gaskets, etc.)
C
Fig. 42
ENGLISH
P
1
2
3
4
5
6
47