Malaguti Madison3 125ie Manuel D'utilisation Et D'entretien page 155

Replacing headlight bulbs
Low beam / high beam light on left side
• Remove plastic cover on left hand side of handlebar (C - Fig.
38).
• Remove connector, rubber cap and fixing spring (Fig. 38a)
• Replace bulb.
• Refit connector, rubber cap and fixing spring.
C
When performing the operations described above, pay attention not to damage parts nearby (transmission, wiring,
gaskets, etc.)
Low beam / high beam light on right side
• Remove air intake on right hand side (P - Fig. 38b) by loosening
the 2 fixing screws (V - Fig. 38b)
• Remove connector, rubber cap and fixing spring (Fig. 38c)
• Replace bulb.
• Refit connector, rubber cap and fixing spring.
• Refit air intake on right hand side.
Fig. 38
Fig. 38a
ENGLISH
V
P
1
2
3
Fig. 38b
4
5
6
Fig. 38c
45