Menu Selection - Malaguti Madison3 125ie Manuel D'utilisation Et D'entretien

3.12.1 FUNCTION SELECTION - WARNING OR ALARM SIGNALS
To make the display easier to understand, functions are organ-
ised in menus and sub-menus.
1
Menus
2
Sub-menus
Warning and alarm signals need not be selected. They appear
3
automatically when the alarm condition arises.
Function selection and use is possible using the MODE button (4
- Fig. 18), located on the front side, on the right handlebar control.
4
Hold the button down more or less to select one function or an-
other.
Sub-menu functions are always accessible, irrespective
5
of the menu that has been opened.
Choice of the speedometer's unit of measurement (km or miles)
can be made every time the battery is disconnected and recon-
6
nected; otherwise use the relative sub-menu. When selecting a
unit of measurement, strictly adhere to the rules in force in your
country.
16
2 " 2 "
Resetting of TD,
LAP and AVE
2 "
A B C D
T D LAP AVE
(Partial) (Chrono) (Average speed)
2 "
increases
by 1 unit
2 "
Time adjust.
(MM)
H
Not pressed
for 20" Time adjust.

3.12.2 MENU SELECTION

A) TD FUNCTION (trip - partial km or mile speedometer):
• This displays the partial distance trav-
elled, in km or miles.
To reset, hold the MODE button down
until the display is showing 000.0 . The
meter is automatically reset when 999.9
km are reached. Counting will thus be
resumed from 000.0.
ENGLISH
Not pressed
Resetting of
for 5"
datum
2 "
E G
TEXT
MAX
S T A N D B - Y
(Ambient temp.)
(Max. speed)
2 "
F
increases
Each press
by 1 unit Selects
selects a menu
km/miles
(total rpm)
2 "
(HH)
Fig.17a