4.4 Wireless Phone Interference With Equipment; Disturbance Of Data Transmission - Dentsply Sirona CEREC AC Notice D'utilisation

4 Safety
4.4 Wireless phone interference with equipment
Note on wireless communication
18
4.4
Wireless phone interference with equipment
The use of mobile wireless phones in practice or hospital environments
must be prohibited to ensure safe operation of the unit.
4.5

Disturbance of data transmission

Data communication between the acquisition unit and the CEREC MC XL
Fragment Worldwide
milling and grinding unit should preferably be established via the wireless
interface CEREC Radio Device or WLAN.
As for all wireless connections (e.g. cell phones), heavy utilization of the
available radio channels or shielding caused by building installations (e.g.
metal-shielded X-ray enclosures) may impair the quality of the
connection. This may become noticeable through a reduction in range
and/or a slower data transmission rate. In extreme cases, it will be
impossible to establish a wireless connection at all.
Sirona has selected the best possible configuration for data
communication via the wireless interface (CEREC Radio Device) or
WLAN, which generally ensures perfect functioning of this connection.
However, in individual cases unrestricted wireless data communication
may be impossible for the reasons mentioned above and/or due to local
circumstances. In such cases, a cable LAN connection should be
selected to ensure uninterrupted operation. If the only LAN interface on
the rear of the CEREC AC is occupied by another plug, remove this
wireless interface connection, and instead connect the LAN cable with the
CEREC MC XL milling and grinding unit.
Dentsply Sirona
Operating Instructions for the Acquisition Unit
66 37 461 D 3492
D 3492.201.06.27.02 09.2017