Technician Diagnostics - Dentsply Sirona CEREC AC Notice D'utilisation

Masquer les pouces Voir aussi pour CEREC AC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10 PC Diagnostic Tool
10.2 Test procedure
74
10.2.2

Technician Diagnostics

You have started the "Technician Diagnostics" test and the
system configuration is displayed.
1. Using the information in the system configuration, check whether the
system corresponds to the default settings. You can scroll up and
down using the arrow keys.
Tip: The test starts automatically after 3 minutes if you do not press
an arrow key.
2. Press the "Esc" key on the keyboard.
 The test starts. The entire test run takes approx. 30 minutes.
 The result, i.e. "Pass" or "Fail", appears at the end of the test
(see sections entitled "Test result: Pass" or "Test result: Fail").
Dentsply Sirona
Operating Instructions for the Acquisition Unit
66 37 461 D 3492
D 3492.201.06.27.02 09.2017

Publicité

Chapitres

Table des Matières
loading

Table des Matières