Dentsply Sirona CEREC AC Notice D'utilisation page 47

Dentsply Sirona
Operating Instructions for the Acquisition Unit
66 37 461 D 3492
D 3492.201.06.27.02 09.2017
Completing the scanning process
1. Start as indicated above, on the occlusal surface of the right terminal
tooth, and scan it occlusally.
Tilt the camera by 45° in a palatinal direction (oral) and guide it from
the distal to the mesial.
2. Tilt the camera another 45° in a palatinal direction (oral) and move it
in a distal direction.
3. Tilt the camera by 90° on to the occlusal surface and move it in a
mesial direction.
4. Tilt the camera in a 45° buccal direction and move it back towards the
distal.
5. Then tilt the camera a further 45° in a buccal direction to a total of 90°
and move it in a mesial direction again.
7 Operation
45