Dentsply Sirona CEREC AC Notice D'utilisation page 36

6 Installation and startup
6.4 Initial startup
34
A Monitor ON/OFF switch
B ON button
1. Switch the acquisition unit on at the main switch.
2. Switch the acquisition unit on at the ON switch.
NOTICE
Possible data loss and PC malfunction:
Switching the acquisition unit off at the ON button during operation may
cause data loss and PC malfunctions.
➢ Always switch the unit off as described in the chapter "Switching the
units off".
3. Switch the monitor on.
4. Switch the milling unit on (see the Operating Instructions for the
Milling Unit).
5. After loading the operating system, start the
application by double-clicking on the
6. For descriptions of further software actions, an online help function
can be invoked with "F1" or via the Help... menu option.
NOTICE
Internet Explorer V 5.0 or higher must be installed on your system in
order to use the online help function.
Operating Instructions for the Acquisition Unit
A
B
C CC
"CEREC SW"
"CEREC SW"
D 3492.201.06.27.02 09.2017
Dentsply Sirona
C
icon.
66 37 461 D 3492