Dentsply Sirona CEREC AC Notice D'utilisation page 40

6 Installation and startup
6.5 Battery-backed operation (optional)
Monitoring window
38
Explanation
The temperature monitor has two message thresholds.
The first message threshold is output as the message
"High" in the temperature result field. The "High" reading
is displayed in the red-and-black flashing mode. No
countdown window appears since, depending on the
load and ambient conditions, the unit can keep operating
for a few minutes, or even for a longer period of time if the
temperature level decreases again. Direct shutdown
occurs if the 2nd threshold is reached.
No battery is inserted.
Restarting delay
Once the power supply has been switched off, it can only be switched
back on again after 10 seconds have elapsed.
Dentsply Sirona
Operating Instructions for the Acquisition Unit
66 37 461 D 3492
D 3492.201.06.27.02 09.2017