Communication Menu; Default Menu; Info Menu - Videotec MAXIMUS MVXT Manuel D'instructions

6.1.6.3 Communication menu

It allows you to configure the following parameters:
Serial ACK: Enables or disables the ACK
1.
response for each command sent (if supported
by the serial communication protocol).
2. ACK PelcoD Standard: enables or disables
the standard PelcoD format for the response
messages
3. Device address: Allows users to configure the
device address.
4. RS-485 speed: Allows users to set the serial
port speed.
5. Reboot: Allows users to reboot the device
(appears in the event of setting changes).
COMMUNICATIONS COMMUNICATIONS
------------------------ ------------------------
1>SERIAL ACK 1>SERIAL ACK
2 ACK PELCOD STAND: 2 ACK PELCOD STAND:
3 DEVICE ADDRESS 3 DEVICE ADDRESS
4 RS485 SPEED 4 RS485 SPEED
5 REBOOT 5 REBOOT
Fig. 42
MNVCMVXTCAM_2121_EN

6.1.7 Default Menu

1.
2.
: : N N
N N
: : 255 255
:38400 :38400
: : Y Y
Fig. 43

6.1.8 Info Menu

The menu is used to check the configuration of the
device and the installed firmware version.
Fig. 44
The Delete Setup operation involves
eliminating all the previously saved data.
Delete Setup: Resets all settings to the default
factory status.
Device reboot: Allows users to reboot the
device.
DEFAULT DEFAULT
------------------------ ------------------------
1>DELETE SETUP? 1>DELETE SETUP?
2 DEVICE REBOOT 2 DEVICE REBOOT
INFO INFO
------------------------ ------------------------
ADDRESS ADDRESS : :
PELCOD PELCOD : :
MACRO MACRO : :
PANASONIC: PANASONIC:
RS485 RS485 : :
HW HW : :
FW FW : :
PC PC :ABCDEFGHIJKLMN :ABCDEFGHIJKLMN
SN SN : : 122333334444 122333334444
: N : N
: N : N
255 255
Y Y
Y Y
Y Y
38400 8N1 38400 8N1
01 01
0.9.3 0.9.3
27