Utility Programmes; Flash Opt Optimisation Programme - Corghi CompactLine EM 9280 Manuel D'utilisation

UTILITY PROGRAMMES

The Utility programmes are all the functions of the machine that are useful for its opera-
tion but are not strictly connected to its normal operation.
Select the Utility and configuration programmes icon to display the list (menu) of the
utility programmes .
Working environment programme
This wheel balancer allows three operators to work at the same time thanks to three dif-
ferent working environments.
- Select the Working environments icon to call up a different working environment.
- The following icons are displayed:
The lit icon shows the operator selected.
- Press the Enter button to select the icon desired .
- Press the Exit button to save the setting and exit .
- The selection can also be seen in the working screen status line.
By selecting a new operator, the machine resets the parameters that were active at the last
UK
recall.
The stored parameters are:
- balancing mode; dynamic, ALU, motorcycle, etc.
- wheel dimensions: distance, diameter and width or those relating to the active ALU pro-
gramme;
- OPT: last OPT.
The machine's general settings remain the same for all working environments: grams/ounces,
sensitivity x5/x1, threshold, etc....

FLASH OPT Optimisation Programme

This procedure reduces the possible vibrations still present in running vehicles after an
accurate balancing. Based on our experiences, the programme can be recalled every time it
is convenient to minimise the running noise produced by the vibrations mentioned above.
The machine also indicates whether or not it is necessary to carry out the procedure by
displaying the following icon in the status bar.
The calculations performed by this programme are based on the unbalance values meas-
Operator's manual EM 9280 - EM 9280 C CompactLine 103