Selecting The Right Program; Operation: Initiate Program - Medela Symphony Mode D'emploi

7.2 Selecting the right program*

The Symphony breast pump is installed with
the Symphony PLUS program card, which
contains two pump programs. The goal of
the INITIATE program is to initiate milk
production. The MAINTAIN program is
designed to build and maintain milk
production.
➙ It is possible that the Symphony Stan-
dard program card is installed on your
Symphony breast pump. The Standard
program is optimised to build and
maintain milk production after secretory
activation has occurred. For operating this
card, see §7.5. While the Standard Card
can be used to initiate lactation, Medela
recommends using the INITIATE program
of the Symphony PLUS program card.
See chapter 11 for ordering information.

7.3 Operation: INITIATE program

1
Press the On/off button
on the breast pump. The display text
shows "INITIATE press ".
* For more detailed information on the program cards, see their instructions for use.
to switch
When the Symphony PLUS card is installed:
Use the INITIATE program directly after birth:
I Until the mother has pumped at least
20 mL in total in each of her last three
pumping sessions, OR
I Throughout the first five days. If milk
production has not started after five days,
change to the MAINTAIN program.
Use the MAINTAIN program after secretory
activation:
I Once the mother has pumped at least
20 mL in total in each of her last three
pumping sessions, OR
I Beginning on day six, whichever of the two
options comes first.
2 3
Press the "Let-down" button
10 seconds. The display text will change
to "INITIATE running".
33
within