Medela Symphony Mode D'emploi page 29

2
2
Screw a disposable bottle onto the
connector. Choose a bottle that suits
your needs. Sizes available are 35, 80,
150 and 250 mL. Push the open end of
the tubing over the protruding part at
the back of the connector.
2
Place the white membrane in a horizon-
tal position on the valve head. Push the
knob on the membrane's back into the
smallest hole of the valve head until it
engages.
3
Check that the transparent cap at the
other end of the tubing is covered with
the protective membrane. If not, place the
membrane with the round side up onto a
flat surface. Push the cap into the mem-
brane until it engages.
3
Push the valve head and
membrane onto the connector.
➙ Position the valve head
sideways.
29