Changing The Program Card; Traveling Outside The U.s - Medela Symphony Mode D'emploi

2
Insert the cord into the card and
cord protector in a loop around
the pin.
¥ Make sure there is enough
play to plug the cord in.
2
Plug the power cord into
the mains socket.
Warning
• Only use the power cord that
comes with the Symphony
• Make sure the voltage of the
power cord is compatible with
the power source.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
8D. Traveling outside of the U.S.
While travelling internationally, we recommend purchasing
a Universal Power Plug Adaptor (not included). Please
® .
consult with the country you are visiting to fi nd out what
type of adaptor will work best. Symphony power cord is
two-pronged and does not require a grounded outlet.
For information about traveling with your breastpump and
expressed breastmilk, visit www.TSA.gov.
3
Push the card and cord protector
over the guide rail on the back until it
stops and tighten the screw.
8C. Changing
the program card
1
As soon as the card compartment
is revealed, the card can be removed
and replaced or changed.
19