1. Cleaning
1.1 Before using for the fi rst time
Clean and sanitize the parts below before
using your pump for the fi rst time. Follow
the cleaning and sanitizing instructions in
Sections 1.2 (start at step 4) and 1.3
that follow.
• Breastshield
• Membrane
• Breastmilk bottles
and lids
Caution
• Only use drinking-quality tap or bottled
water for cleaning.
• Take apart and wash all parts that
come in contact with the breast and
breastmilk immediately after use to
avoid dry up of milk residues and to
prevent growth of bacteria.
8
87071
or
8107264
• Breastshield
connector
• Valve
1.2 After each use
Clean all parts that come in contact
with your breast and breastmilk.
See image in Section 1.1.
1
Separate breastshields from
breastshield connectors.
4
Rinse in cool water all separated
parts that came in contact with
breast and breastmilk in order to
remove breastmilk residue.