Assembling The Reusable Pump Set - Medela Symphony Mode D'emploi

6. Preparing for pumping
Caution
28
l Wash hands thoroughly (at least one
minute) with soap and water before
touching the breast, the clean pump
and the clean pump set parts. Dry your
hands with a fresh towel or a single-use
paper towel.
Note
l Use Medela original accessories only.
l The disposable pump set does not need
cleaning prior to first use.
l The reusable pump set needs cleaning
prior to first use. See the cleaning over-
view in chapter 5.2.
l Check pump set parts for wear or
damage before use. Replace damaged or
worn parts.
l Check that the transparent cap is
attached to the protective membrane
correctly.
l All parts must be completely dry before
use.
i
Info
l Carry out all the steps with care and
assemble the pump set correctly.
Otherwise a good vacuum may not be
achieved.
* For more detailed information on the use of the
pump set, see the pump set's instructions for use.
6.4 Assembling the disposable
pump set*
1
Open the packaging of the dispos-
able pump set. Push the connector
onto the breast shield. Then push
the white valve onto the connector
(if not yet assembled).
6.5 Assembling the reusable
pump set*
1
Carefully push the breast shield
onto the connector.
Choose a breast shield size that
suits your needs.