Installation Of The Card And Cord Protector (Optional); Mains Operation - Medela Symphony Mode D'emploi

6.2 Installation of the card and
cord protector (optional)
1
Insert the cord into the card and
cord protector in a loop around
the pin.
➙ Make sure there is enough play
to plug the cord in.

6.3 Mains operation

1
Insert the power cord into
the power socket on the
back of the pump.
2
Push the card and cord protector
over the guide rail on the back until
it stops and tighten the screw.
2
Plug the power cord into the
mains socket.
27