4
Program complete
The INITIATE program runs automatically for
15 minutes with stimulation, expression and
pause phases. An acoustic signal indicates
the end of the program. The display shows
"Program complete". The pump switches
off automatically.
➙ It is important to complete the entire
INITIATE program.
3
The pump will automatically switch to the
expression phase after two minutes.
➙ If the milk starts to flow sooner, press
the Let-down button
expression phase.
to change to the
7.4 Operation: MAINTAIN program
1
Press the On/off button
the breast pump. The MAINTAIN program
will automatically start with the stimulation
phase after pressing the On/off button.
4
Set the comfort vacuum for the expression
phase (see chapter 7.6). The bars on the
display show the vacuum level. The more
bars, the stronger the vacuum.
35
to switch on