Mains Operation; Assembling The Symphony Pump Set - Medela Symphony Série Mode D'emploi

Preparing for pumping (cont.)
16

5.3 Mains operation

5.4 Assembling the Symphony pump set

• Wash hands thoroughly (at least one minute) with soap and water before touching the
breast, the clean pump and the clean pump set parts.
• Dry your hands with a fresh towel or a single-use paper towel.
2. Push the card and cord protector over the guide
rail on the back until it stops and tighten the screw.
3. To remove, unscrew the card and cord protector
and slide out of the guide rail.
1. Insert the power cord into the power socket
on the back of the pump.
2. Plug the power cord into the mains socket.
CAUTION