Assembling The Pump Set - Medela Symphony Mode D'emploi

6. Preparing for pumping
Caution
20
l Wash hands thoroughly (at least one
minute) with soap and water before
touching the breast, the clean pump
parts and clean pump set. Dry your
hands with a fresh towel or a single-use
paper towel.
Note
l Use Medela original accessories only.
l Check pump set parts for wear or
damage before use. Replace damaged
or worn parts.
l All parts must be completely dry
before use.
i
Info
l Carry out all the steps with care and
assemble the pump set correctly.
Otherwise a good vacuum may not be
achieved.

6.4 Assembling the pump set

1
Carefully push the breast shield
onto the connector. Choose a
breast shield size that suits your
needs.
 See chapter 7.1 to choose the
right size.
4
Screw a Medela bottle onto the
connector. Choose a size that
suits your needs.