Changing The System Monitoring - SKF LAGD 1000 Mode D'emploi

4.3.3 Changing the system monitoring

Step Key
1
Press for more
than 2s
2
Press briefly
(confirm code)
3
Operate keys until:
4
Press briefly
5
Press appropriate
key until
6
Press briefly
7
Press for more
than 2 seconds
SKF LAGD 1000
Display
Confirm new settings
New settings are written to the memory, and the LED
indicators extinguish
000 in display flashes
Automatically indicates first
parameter. Example:
"Pause in timer operation"
LED "Pause" flashes
Monitoring menu is displayed
Monitoring deactivated
monitoring with cycle switch is
active LED "CS" flashes. (factory
setting for LAGD 1000)
or monitoring with pressure switch
is active
Not to be used with LAGD 1000
27