Cleaning And Care - Steba SousVide SV 100 professional Mode D'emploi

Cleaning and care

∙ Allow device to cool to room temperature.
∙ Do not immerse electrical part in water.
∙ Wipe surface of housing with a damp cloth.
∙ After 100 hours of use, the display shows the symbol "CLEAN".
The device beeps every time it is turned on to remind you that
it needs to be cleaned.
Cleaning preparation
A container higher than 18cm, a bottle of food grade acetic acid (such as white vi-
negar or apple vinegar and so on)
Cleaning instruction
As the tap water is with mineral substance, when the water is heated up to a certain
degree, the mineral substance will become incrustation and stay on the surface of the
heater and the unit which will affect the result of heating and cosmetic.
Cleaning steps
∙ Put the unit in the container correctly, and then pour some water into the contai-
ner until it reaches the Max water level. Acetic acid dosage: 5g per 10L water. Users
can add the acetic acid according to the actual volume of the container. (Remark:
if the acetic acid goes into the eyes heedlessly, please wash the eyes with plenty of
clean water instantly, and should turn to the doctor in time in serious cases.)
∙ Immediately after pluging in the device, press
taneously for 3 seconds. The device shows the cleaning mode (h and 80°C). Press
the start button. After the time run out, the working hours and the symbol in the
display will be deleted.
be 80176Fand the work time for 3hours 03:00, and then press start. After working 3
hours, the machine will start beeping until the user press "stop" and switch it off.
∙ Check the result of the cleaning. If it does not reach the intended cleaning effect,
the user can restart the machine according to step 2 by adding more acetic acid.
If the result of cleaning is satisfying, please pour the acid water and clean the unit
and the container with clean water respectively in time. And dry the unit before
storage.
14
Alternatively, you can set the work temperature to
(of the timer) and simul-