Cleaning And Care; Working Area - Steba SV 200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

Cleaning and care

∙ Allow device to cool to room temperature.
∙ Do not immerse electrical part in water.
∙ Wipe surface of housing with a damp cloth.
∙ After 100 hours of use, the display shows the symbol "CLEAN".
The device beeps every time it is turned on to remind you that
it needs to be cleaned.
∙ Cleaning preparationa bottle of food grade acetic acid (such as
white vinegar or apple vinegar and so on)
Cleaning instruction
As the tap water is with mineral substance, when the water is heated up to a certain
degree, the mineral substance will become incrustation and stay on the surface of the
heater and the unit which will affect the result of heating and cosmetic.
Cleaning steps
∙ Pour some water into the container until it reaches the Max water level. Acetic acid
dosage: 5g per 10L water. Users can add the acetic acid according to the actual
volume of the container. (Remark: if the acetic acid goes into the eyes heedlessly,
please wash the eyes with plenty of clean water instantly, and should turn to the
doctor in time in serious cases.)
∙ Immediately after turning on the device, press
device shows the cleaning mode (h and 80°C). Press the start button. After the time
run out, the working hours and the symbol in the display will be deleted.
∙ Alternatively, you can set the work temperature to be 80176Fand the work time for
3hours 03:00, and then press start. After working 3 hours, the machine will start
beeping until the user press "stop" and switch it off.
∙ Check the result of the cleaning. If it does not reach the intended cleaning effect,
the user can restart the machine according to step 2 by adding more acetic acid.
If the result of cleaning is satisfying, please pour the acid water and clean the unit
and the container with clean water respectively in time. And dry the unit before
storage.

Working area:

Important: Never place the appliance on or next to a hot surface (e.g. stove). Always
use it on a stable, flat and temperature resisting surface. Always take care that no
inflammable objects are near to the appliance.
14
and
simultaneously. The

Publicité

Table des Matières
loading

Table des Matières