Breast Pump & Tubing Care; Tubing & Faceplate Care - Medela Pump In Style Advanced Mode D'emploi

5. Breast Pump & Tubing Care
Caution
• Do not store wet or damp parts as mold
may develop.
• If tubing becomes moldy, discontinue use
and replace tubing. To find replacement
parts visit www.ShopMedela.com.
Note
• Tubing should be washed if dirty or milk is
present. Follow instructions in Section 5.1.
• Cleaning tubing is not necessary if
condensation inside the tube is from previous
washings or atmospheric conditions. Follow
drying instructions in Section 5.1.
Supplies needed:
• Mild dish soap
• Clean dish cloth
• Clean wash basin
• Drinking quality water
Parts needed:
• Tubing
• Faceplate
• Diaphragm
• Breast pump bag
Info
Common causes of milk overflow into tubing:
• Heavy let-down
• Leaning forward or lying down while pumping
• Improper cleaning of valves and membranes
• Damaged membranes
• Overfilling bottles while pumping
16
You may wash
tubing by following
the instructions on
the Quick Clean™
Breast Milk Removal
Soap bottle. (Sold
separately.)
5.1 Tubing & faceplate care
1
Turn off breast pump.
4
Remove tubing from breast shield.