Medela Pump In Style Advanced Mode D'emploi page 22

6. Assembly (cont.)
Warning
• Use only the power adaptor supplied with
the Pump In Style
• Always inspect the 9 volt power adaptor
and Battery Pack cords prior to use for
damaged, kinked, twisted, frayed or
exposed wires. If damaged, immediately
discontinue use. For replacement parts
visit www.shopmedela.com.
Twists, kinks or bends
Has bulges
Note
• See Section 6.3.2 Battery Pack
Assembly for instructions on the use of
the Battery Pack.
• See Section 6.3.3 Traveling Outside
the U.S. for information on using your
device internationally.
22
® Advanced.
Exposed wires
6.1 Assembly of pump kit
(cont.)
7
87071
Insert the hard yellow adapter
ends of tubing into the hole on
the back of the breast shield
connectors.
10
Plug the metal fitting on the end
of the 9 volt power adaptor or
Battery Pack cord into the power
jack on the front of the breast
pump faceplate.
8107264