Medela Pump In Style Advanced Mode D'emploi page 27

2
Replace all batteries at the
same time.
Slide off both battery covers.
Four (4) batteries are placed on
each side of battery pack.
Purchase the 9 volt Portable Vehicle
Adaptor (sold separately) item
67174. Visit our online store at www.
shopmedela.com.
The Portable Vehicle Adaptor may not
work with all vehicles. Please check
the owner's manual for compatibility
with 12-24 volt input.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
Place the NEGATIVE (-) end of the battery
against the front of the spring by pushing the
battery in and down in one motion until the
battery snaps into place.
The POSITIVE (+) end of the battery should be
near the positive sign on the battery pack.
or
Use the power adaptor that was
included with your Pump in Style
Advanced breast pump with
universal prong converters (sold
separately, not a Medela item)
Please note: The previous Pump in Style Advanced
power adaptor (item number 68030 or 9207010) is not
compatible outside of North America. Please call Medela
Customer Service if you have any questions.
®
27