Cleaning Your Motor Unit - Medela Pump In Style Advanced Mode D'emploi

8
• Soak in warm soapy water for
5 minutes.
• Clean with a clean dish-cloth or
soft brush
• Rinse parts with clear water.
• Allow to air dry in a clean area.
11
Align connection points and
hold the back of the pump with
one hand while pushing on the
faceplate until it snaps into place.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
9
• Some breast pump models may have
a diaphragm that appears different
than pictured above.
• Carefully wipe the entire surface area
of the diaphragm where particles or
liquid may have accumulated, with a
clean (no soap), damp cloth.
• Allow all parts including edges to air
dry, completely, in a clean area
before replacing the faceplate.

5.2 Cleaning your motor unit

Use a damp (not wet) cloth to wipe
the breast pump bag after each use.
19