Prior To First Use; After Each Use; Tubing Care - Medela Swing Mode D'emploi

Masquer les pouces Voir aussi pour Swing:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Prior to cleaning, disassemble all parts of your pump kit (PersonalFit
breastshield, valve, membrane, bottles and caps). Be especially sure to
remove the yellow valve from the breastshield and separate the white
membrane from the valve prior to cleaning. See parts E & F on (page 1).
All pump kit parts, bottles and caps can be cleaned with soap
and water or boiling.

Prior to first use:

Disassemble all parts of your pump kit that come into contact with the
breast and milk (PersonalFit
brane, bottles and bottle caps). Sanitize in boiling water for 10 minutes.

After each use:

Disassemble and wash all parts of your pump kit that come into
contact with the breast and milk (PersonalFit breastshield, pump body,
valve, membrane, bottles and bottle caps) in warm, soapy water. All
parts are to be disassembled and washed separately for the pump to
function efficiently.
Rinse in clear water.
Air-dry on clean towel and cover parts when not in use.
Do not wash the motor or power cord. Use a damp (not wet) cloth to
wipe down the motor if necessary (see part A on page 1)
Alternatively, use Quick Clean
Micro-Steam

Tubing Care:

Inspect tubing after each pumping session for condensation and/or milk.
If condensation appears in tubing:
To eliminate condensation after you have completed pumping, continue
running the pump with the tubing attached for another 1-2 minutes or
until dry.
8
Bags for easy, convenient daily cleaning.
breastshield, pump body, valve, mem-
Breastpump Wipes or Quick Clean

Publicité

Table des Matières
loading

Table des Matières