Medela Pump In Style Advanced Mode D'emploi page 17

2
Unplug breast pump from
power source.
5
Rinse tubing in cool water to
remove breast milk.
NOTE:
Clean the faceplate monthly. Also, inspect tubing after each pumping session.
Clean tubing, faceplate and diaphragm if there is any sign of breast milk.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
Remove tubing by pulling
straight out of tubing ports.
Do not wiggle or pull tubing
at an angle.
6
• Wash tubing in warm soapy water.
• Rinse tubing with clear water.
• Hang to air dry or connect the tubes to
the running breast pump and allow any
moisture that has formed to dry.
Continued
next page.
17