Pumping; Device Operation - Medela Pump In Style Advanced Mode D'emploi

Masquer les pouces Voir aussi pour Pump In Style Advanced:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7. Pumping

Caution
• Always inspect breast shields, breast
shield connectors, white membranes,
yellow valves, and tubing prior to use for
cleanliness. If dirty, see Section 5.1.
• If you experience pain or other symptoms
while pumping seek advice from your
healthcare professional or breastfeeding
specialist. See Section 11 for more
information.
• Do not try and express with vacuum that is
too high and uncomfortable (painful). The
pain, along with potential breast and nipple
trauma may decrease milk output.
• Make sure tubing is not kinked or
pinched while pumping.
• Contact your healthcare professional or
breastfeeding specialist if you can express
only minimal or no milk, or if expression
is painful.
Info
• Research has shown that you will pump
more efficiently – get more milk in less time
– when pumping at Maximum Comfort
Vacuum
during the Expression Phase.
• You should reassess your Maximum
Comfort Vacuum throughout your pumping
experience, because it can change during
the different stages of lactation, see step 5
in Section 7.
• Do not tilt or overfill containers
when pumping.
28

Device operation

1
Wash your hands before touching
breast pump, kit and breasts
and avoid touching the inside of
containers or lids.
4
After two minutes, the pump
will automatically change to the
Expression Phase.
a. If you let-down (your milk starts to
flow) sooner than 2 minutes, press
the let-down
button.
b. If let-down has not happened
during the Stimulation Phase and
the pump has switched to the
Expression Phase, press the let-
down
button once to return to
the Stimulation Phase.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

101036449101036445101036453

Table des Matières