Uview - Samoa NEXU FLUID MANAGEMENT SYSTEM Guide D'instructions Et Pièces De Rechange

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. INSTALLATION AND CABLING
Regarding LEDS and buttons you can find:
• 1 - Address indication / Delivered quantity
• 2 and 3 - Configuration buttons
• 4 - Indication LEDS. From left to right Solenoid opening
indication,
bypass
indication,
End of Line indication.

3.2.5 UVIEW

As per the UValve, there are two terminals (IN and OUT) for the CANBUS.
The device has 3 screen display modes, named
"standby mode, "standard" mode and "XXL" mode.
The "standby" mode (figure 1) is the display mode
shown when no transaction is in progress. While a
transaction is being made, the screen will show the
"standard" mode (figure 2) or the "XXL" (figure 3)
according to the device configuration (see the "menu
configuration" section for more details).
Depending on the screen mode, the unit address (1),
the fluid volume dispensed (2), the progress status bar
of the transaction (3) or the indicator which shows that
the solenoid valve is open (4), will be displayed.
1
Regarding LEDS and buttons you can find:
• 1 - Address indication / Delivered quantity
• 2 and 3 - Configuration buttons
• 4 - Indication LEDS. From left to right Solenoid opening
indication,
bypass
indication,
End of Line indication.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
online
CANBUS
indication,
1
fig. 1
3
2
online
CANBUS
indication,
1
4
5
7
9
4
fig. 2
2
1
4
2
3
fig. 3
2
3
R. 11/21 838 861
EN
11

Publicité

Table des Matières
loading

Table des Matières