Selecting The Display Language; Setting The Clock; Setting The Buzzer Volume - Hürner HCU 300 Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
manual input is not allowed.
"Welder Code Options – M – " means that by pressing the
MENU key, the user can access a sub-menu that allows
determining when the welder code, if it is enabled at
"Recording," has to be entered:always, i. e. before evey
single welding operation, only before the first welding
operation after switching the unit on or only after the
first welding operation of a new day/date.
"Language – M – " means that by pressing the MENU key,
the user can access a sub-menu for selecting the display
and report language (see Sect. 10.1.1).
"Date/Time – M – " means that by pressing the MENU key,
the user can access a sub-menu for setting the clock
(see Sect. 10.1.2).
"Buzzer Volume – M – " means that by pressing the MENU
key, the user can access a sub-menu for setting the
volume of the status buzzer (see Sect. 10.1.3).
"Temperature Unit – M – " means that by pressing the
MENU key, the user can access a sub-menu for select-
ing centigrade or Fahrenheit as the unit for the tem-
perature.
"Inventory Number – M – " means that by pressing the
MENU key, the user can access a sub-menu for entering
the number under which the unit is inventorized with
the operating company.

10.1.1 Selecting the Display Language

When the "Select Language" sub-menu was selected, the
screen changes and the display reproduced in Display 17
appears.
Use the arrow keys ñ and ò to select one of the options,
"Deutsch," "English," and "Français" and confirm by press-
ing the START/SET key.

10.1.2 Setting the Clock

When the "Set Clock" sub-menu was selected, the screen
changes and the display reproduced in Display 18 appears.
The time of day and the date can be set using the keypad.
The portions "Hour," "Minute," "Day," "Month," and
"Year" are set separately. Press the START/SET key to con-
firm your settings.

10.1.3 Setting the Buzzer Volume

When the "Set Volume" sub-menu was selected, the screen
changes and the display reproduced in Display 19 appears.
The buzzer can also be heard. Turn the buzzer volume up
or down to the desired value using the , ð arrow keys
Version March 2016 HÜRNER HCU 300 User's Manual
*** SET-UP MENU ***
Wldr Code Option-M-
>Language -M-
Date/Time -M-
Display 15
Settings
>Buzzer Volume -M-
Temp. Unit -M-
Inventory No. -M-
Display 16
**** LANGUAGE ****
>Deutsch
English
Francais
Display 17
Date/Time
21.06.13 14:28
Display 18
BUZZER VOLUME
< ------20-------- >
Display 19
EN
19