Entering The String Of Numbers; Downloading The Reports; Selecting The File Format; Downloading All Reports - Hürner HCU 300 Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany

7.2 Entering the String of Numbers

If this option was chosen in the manual parameter input
menu, the "Enter Fitting Code" display shows. The 24 char-
acters of the fitting code to be entered display as asterisks
( * ). Use the alphanumeric keypad (see Info in Sect. 5.2)
to enter the code and press START/SET to confirm your
input and have it decoded. If the code entered is not cor-
rect, an "Input Error" message appears; check the string
of numbers and correct as needed. If the code is correct,
the decoded data is displayed, and the "Start ?" message
indicates that the unit is ready to start welding.
8

Downloading the Reports

Interface
(see next page)
USB A Interface Port
for connecting USB mass storage media (such as a
memory stick)
The interface port complies with the USB version 2.0
specification (i.e., maximum data rate of 480 megabits
per second).
Before transferring data, it is highly recommended
to switch the welding unit off and on again. If this
fails to happens, there is a risk of data transfer
Important
failure, or reports in the welding unit may be cor-
rupted.

8.1 Selecting the File Format

Connecting the printer or storage media causes the the
screen to appear in which the format of the output file
with the welding reports can be selected: a PDF file with an
abstracted or extended version of the report or the format
of the welding data management application DataWork.
Using the ñ and ò arrow keys, select the file type you need
and confirm your selection by pressing the START/SET key.
The Service Report option is not important for normal op-
eration. This report lists the events related to the service
and maintenance of the welding unit.

8.2 Downloading All Reports

After the file type was selected, the next screen offers a
"Print All Reports" option. Selecting it will download all
welding reports currently in system memory in the previ-
ously selected file format.
Version March 2016 HÜRNER HCU 300 User's Manual
Select File Type
DataWork File
>PDF Abstract
PDF Ext'd Report
Display 12
EN
15