Understanding The "Settings" Sub-Menu; Selecting The Display Language; Setting The Clock; Setting The Buzzer Volume - Hürner HCU 300 mini Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Press the START/SET key to confirm the set-up and save it to
memory.

10.1 Understanding the "Settings" Sub-menu

"Check Code Expiry on" means that the welder identification code has
to be current and not expired (default period of validity 2 years
from code issuance), or the welding operation cannot be started,
"off," that the validity of the code is not checked at all.
"Memory Control on" means that when the system memory is full of
reports, the unit will be blocked until the reports are printed or
downloaded, "off," that it works but that the oldest report will
be overwritten.
"Manual Input on" means that the manual input of welding param-
eters (see Sect. 7) is possible, "off," that the manual input is not
allowed.
"Welder Code Options – M – " means that by pressing the MENU
key, the user can access a sub-menu that allows determining
when the welder code, if it is enabled at "Recording," has to be
entered:always, i. e. before evey single welding operation, only
before the first welding operation after switching the unit on or
only after the first welding operation of a new day/date.
"Language – M – " means that by pressing the MENU key, the user
can access a sub-menu for selecting the display and report lan-
guage (see Sect. 10.1.1).
"Date/Time – M – " means that by pressing the MENU key, the user
can access a sub-menu for setting the clock (see Sect. 10.1.2).
"Buzzer Volume – M – " means that by pressing the MENU key, the
user can access a sub-menu for setting the volume of the status
buzzer (see Sect. 10.1.3).
"Temperature Unit – M – " means that by pressing the MENU key, the
user can access a sub-menu for selecting centigrade or Fahrenheit
as the unit for the temperature.
"Inventory Number – M – " means that by pressing the MENU key,
the user can access a sub-menu for entering the number under
which the unit is inventorized with the operating company.
"Number of Tags – M – " means that by pressing the MENU key, the
user can access a sub-menu for entering the number of tags that
are printed automatically after welding with the optional label
tag printer if such a printer is connected.

10.1.1 Selecting the Display Language

When the "Select Language" sub-menu was selected, the screen
changes and the display reproduced in Display 16 appears.
Use the arrow keys ñ and ò to select one of the options, "Deutsch,"
"English," "Français," etc. and confirm by pressing the START/SET
key.

10.1.2 Setting the Clock

When the "Set Clock" sub-menu was selected, the screen changes and
the display reproduced in Display 17 appears.
The time of day and the date can be set using the keypad. The portions
"Hour," "Minute," "Day," "Month," and "Year" are set separately.
Press the START/SET key to confirm your settings.

10.1.3 Setting the Buzzer Volume

When the "Set Volume" sub-menu was selected, the screen changes
and the display reproduced in Display 18 appears. The buzzer can also
be heard. Turn the buzzer volume up or down to the desired value
Version November 2015 HÜRNER HCU 300 mini User's Manual
*** SET-UP MENU ***
>Check Cd Expiry off
Memory Control on
Manual Input on
Display 13
*** SET-UP MENU ***
Wldr Code Option-M-
>Language -M-
Date/Time -M-
Display 14
*** SET-UP MENU ***
Buzzer Volume -M-
>Temp. Unit -M-
Inventory No. -M-
Display 15
***** LANGUAGE *****
>Deutsch
English
Francais
Display 16
Date/Time
21.06.13 14:28
Display 17
Buzzer Volume
< ------20-------- >
Display 18
EN
15