Safety Rules; General; Qualified Personnel - Fronius Primo 3.0-1 Instructions De Service

Safety rules

General

The device has been manufactured in line with the state of the art and according
to recognized safety standards. If used incorrectly or misused, however, it can
cause:
-
-
All personnel involved in commissioning, maintenance, and servicing of the
device must:
-
-
-
The Operating Instructions must always be at hand wherever the device is being
used. In addition to the Operating Instructions, attention must also be paid to
any generally applicable and local regulations regarding accident prevention and
environmental protection.
All safety and danger notices on the device:
-
-
-
-
The terminals can reach high temperatures.
Only operate the device when all protection devices are fully functional. If the
protection devices are not fully functional, there is a danger of:
-
-
Any safety devices that are not fully functional must be repaired by an author-
ised specialist before the device is switched on.
Never bypass or disable protection devices.
For the location of the safety and danger notices on the device, refer to the sec-
tion headed "General remarks" in the Operating Instructions for the device.
Any equipment malfunctions which might impair safety must be remedied before
the device is turned on.
This is for your personal safety!
Environmental Operation or storage of the device outside the stipulated area will be deemed as
conditions not in accordance with the intended purpose. The manufacturer accepts no liab-
ility for any damage resulting from improper use.
Qualified per-
The servicing information contained in these operating instructions is intended
sonnel
only for the use of qualified service engineers. An electric shock can be fatal. Do
not carry out any actions other than those described in the documentation. This
also applies to qualified personnel.
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operating
company.
Be suitably qualified
Have knowledge of and experience in dealing with electrical installations and
Have fully read and precisely followed these Operating Instructions
Must be kept in a legible state
Must not be damaged
Must not be removed
Must not be covered, pasted or painted over
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operating
company
5