Publicité
4. Description of the machine
4.1 Technical specifications
Designation:
ArciFit 300 / InnoFit 300 drawer assembly jig
for manually assembling drawer systems (ArciTech / InnoTech)
Mechanical system no.:
Year built:
Site of installation:
System dimensions:
Length: 1,086 mm
Width: 1,525 mm
Height: 656 mm
Weight:
160 kg
Nominal pressure:
6 bar
Connection:
G 1/8
Temperature:
18 °C to 40 °C
Air humidity:
30 % to 70 %
Max. noise level:
75 dB (A)
System's energy requirement:
Pneumatic:
0.024 Nm3/h at 1 bar (standard volume / standard litre)
Note
For further Technical Specifications, refer to the
i
documentation provided by the manufacturers.
Unauthorised changes and modifications to
the system are not permitted for safety rea-
sons and rule out any liability on the part of
the manufacturer for any resultant damage.
82
4. Description of the machine
4.2 Controls
Switches and other controls for operating and monitoring the
machine are described below.
1
Fig. 4: Two hand switch system
1
Pushbutton
2
Pushbutton
The assembly process is started automatically by simultane-
ously pressing pushbuttons
and
and holding them down.
1
2
2
4.3 Setting up
Warning
Warning!
Setting up work must only be performed by
qualified staff (referred to below and "operator")
who, on the basis of their specialised training,
experience and instruction, possess sufficient
knowledge about
· safety regulations,
· accident prevention regulations,
· guidelines and generally accepted codes of
practice.
These qualified staff must be authorised to per-
form setting up work by the person responsible
for the machine's safety.
83
Publicité
Chapitres
Dépannage
