Calibration Mode; Language - Burkert 8205 Manuel D'utilisation

4 OPERATION
4.3 Calibration Mode: Press
The following adjustments are set in the calibration mode display:

LANGUAGE

T° UNIT
CURRENT
RELAY 1
0......9
RELAY 2
T ° SENSOR
VOLTAGE
FILTER
END
4.3.1 Language
ENTER
LANGUAGE
ENTER
T° UNIT
ENTER
English, German, French, Italian, or Spanish choice (§ 4.3.1)
Temperature unit selection (°C; °F). (§ 4.3.2)
Adjustment of the 4...20 mA measuring range (pH or T°).
(§ 4.3.3)
Adjustement of the parameters for relay 1 (§ 4.3.4)
Adjustement of the parameters for relay 2 (§ 4.3.4)
Selection of the temperature entry Pt1000 or Manual (without
Pt1000). Entry of the simulation value. (§ 4.3.5)
Electrode voltage display or not, within the Operation Mode
Display. (§ 4.3.6)
Damping selection. 10 different steps available. (§ 4.3.7)
Back to the operation mode and storage of new parameters.
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
SPANOL
E-27-
PH TRANSMITTER 8205
simultaneously for 5 seconds
The selected language is con-
firmed by the ENTER key and
becomes immediately active.