Calibration Mode; Language - Burkert 8206 Manuel D'utilisation

4 OPERATION
4.3 Calibration Mode: Press
The following adjustments are set in the calibration mode display:

LANGUAGE

CURRENT
RELAY
FILTER
END
4.3.1 Language
LANGUAGE ENTER
CURRENT ENTER
REDOX TRANSMITTER 8206
ENTER
Selection between English, German, French or Italian.
Determination of 4...20 mA measuring range.
Parameter definition of relays. This message only appears if the
relay option has been installed.
Dampening selection. There are ten different steps available.
Back to the operation mode and storage of new parameters.
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
E-26-
simultaneously for 5 seconds
The selected language is confir-
med by the Enter-key and becomes
immediately active.