Burkert 8205 Manuel D'utilisation page 52

3 INSTALLATION
Realizing (principle) the equipotentiality of a compact version:
+
-
Power
(*)
supply
Metallic devices
(valve, pump, etc)
Power supply
(*) If direct earthing is impossible, connect a
100 nF / 50 V-condensator between the negative
terminal and the earth.
3.2.2 Electrical connection, compact version without relay, with
EN 175301-803 cable plug
Assembly of the EN 175301-803 cable plug
3
2
1
5
8205
Panel or wall-
mounted version
Plastic pipes
+
-
(*)
- Extract part [3] from part [2].
- Unscrew cable gland [5].
4
- Insert cable into part [2] via cable gland [5].
- Connect part [3] (see hereafter).
- Replace part [3].
- Tighten cabe gland [5].
- Place gasket [4] between connector and fixed connector.
- Plug the connector onto the transmitter.
- Tighten screw [1].
Fig. 3.4 Assembly of EN 175301-803 cable plug
E-12-
PH TRANSMITTER 8205
8200
8205
Panel or wall-
mounted version
Metallic pipes
8200