Hofmann geodyna 8200 Manuel Opérateur page 80

Operation
5.10 SPOKES OFF AUTOMATIC
1
Mode "BALANCE NO SPOKES"
The Spokes Off Automatic Mode has the same features

as the Automatic function already described ( 5.9),
except that it excludes automatic rim spoke detection.
When it is established that no information about spokes
is needed, in-depth spoke detection by the laser can
be switched off.
2
This noticeably reduces the overall measuring run time.
After the measuring run the condition is identified by
the pair of symbols (2, Fig. 5-38);
- Automatic "BALANCING"
5-38
- Rim with question mark
80