Hofmann geodyna 8200 Manuel Opérateur page 30

14
22
30
4-12
4-13
Layout
4.1.3 Settings
After switching on the unit, a default weight mode is
shown. If the unit then shows another weight mode,

5.5.3.
The unit of measurement indicated at power up is
inches, but the setting selected before switching off
for grams / ounces remains.
4.1.3.1 Dimension Unit Toggle
Default diameter and width unit setting: inches.
• Press the "mm" or "inch" icon (14, Fig. 4-12).
The measuring unit changes to the possible alternative.
4.1.3.2 Weight Unit Toggle
Default weight unit setting: grams.
Proceed as follows to change the weight unit of
measurement before or after a measuring run.
 Press the "g" or "oz" icon (22, Fig. 4-13).
The measuring unit changes to the possible alternative.