Hofmann geodyna 8200 Manuel Opérateur page 18

1
2
3
4
5
6
7
8
9
10
18
4-4
4-4b
Layout
4.1.1 Fundamental Commands
Figure 4-4 Keypad
1 Type of basic key (this type of key is always located
in the Commands Field).
2 HOME key
3 ESC key
4 HELP key
5 START key
6 STOP key
7 CONFIRMATION key
8 RETURN key
Description of keys
1 Keys (example)
– Activate certain functions for the execution and
continuation of a specific operation of the cycle.
The symbols on the keys show their functions, as
specified below.
2 HOME key
– Returns you to the basic INTRO SCREEN.
3 ESC key
– Exits the current Screen Page.
4 HELP key
– Displays useful information to explain a situation
and – in case of error codes – provides hints for
remedy.
5 START key
– Starts the measuring run.
Press to start wheel rotation, with the wheel guard
down.
6 STOP key (forced stop)
– Immediately brakes the measuring run and
any other automatic movement in progress, for
example, wheel clamping and the Lifter (if present).
7 CONFIRMATION key
– Inserts the selected options.
8 RETURN key
– Returns you to the previous step.
9 PRINT key
– For managing printouts, to be sent to the printer,
to the USB flash drive or Network, based on the
SETTINGS.
10 RIM DATA ENTRY key
– To manually enter wheel dimension information.
Electromechanical STOP
Figure 4-4b
When the Electromechanical Stop Button is pressed,
the machine stops all automatic movements.
This key also allows access to User Codes (

7.1).