Factory Settings; Setting A Changed Parameter As Standard - Medela Thopaz Mode D'emploi

Factory settings

Setting a changed
parameter as standard
34 |
Changing settings
Change settings
Change pressure
Thopaz is delivered with the
following factory settings.
These settings can be
changed and saved as
the new standard.
1. Switch to «Set as standard»
by pressing [
2. Activate «Set as standard»
with «OK».
3. Press [ ] or [
change from «no» to «yes»
and confirm with «OK».
(The display will switch
back to «no»).
4. Press «back» to reactivate
the Standby mode.
The new setting is active
whenever Thopaz is
switched on.
] 4 times.
] to