Change Settings - Medela Invia Liberty Mode D'emploi

Change settings

24
1. To enter the Administrative mode,
➡
unlock the display, press and hold [
2. Press the soft buttons [
the Settings menu.
3. To change a setting, choose with the Selection buttons
[ ] or [
4. Press "OK"
5. To change value,
choose with the Selection buttons [
6. Press "OK"
If the changed setting is not confirmed with "OK", the pump
will switch back to the previous setting.
7. Press "Back"
1 minute after the last button has been pressed, the Invia
➡
Liberty pump switches into Patient mode automatically and
the display is locked.
+
] at the same time to enter
].
–40 to –200 mmHg (– 5 to –27 kPa)
[ ] to select.
[ ] to confirm.
[ ] to exit settings.
], and then press [
Selection
kPa / mmHg
Standard / Detailed
Standard / High
Languages according to list
Selection
1 – 8 min
1 – 8 min
+12 until –12 hours GMT
as displayed
as displayed
Selection
as displayed
] or [ ].
].