Switch Thopaz On - Medela Thopaz Mode D'emploi

8.4

Switch Thopaz on

24 |
Preparation for use / operating instructions
Important: Do not yet connect the patient to the system.
1.
If the selftest is not successful, see the troubleshooting
instructions on the display and refer to chapter 13.
2.
yes Thopaz will issue a new therapy number (recommended
for a new patient).
no The therapy number remains unchanged (recommended
for the continued treatment of the same patient).
The graphic presentation is retained.
1.1 Press [ ] to switch on
Thopaz. A selftest starts.
1.2 Check acoustic signal
(beep).
2.1 Confirm whether a new
patient is connected or
not. The therapy number
is important for data
transfer to the PC.