Change Settings - Medela Invil Liberty Mode D'emploi

Change Settings

XIII
The settings can only be changed when the pump is in the administrative mode
(see page 12).
Changing pressure levels
Enter the administrative mode by pressing and holding [
[
modes).
With the "soft" buttons choose the desired vacuum and confirm with "OK".
If the values are not confirmed, they will be changed automatically within 5 seconds.
Controlling On/Off times
In order to control On/Off times, enter the administrative mode (see page 12).
Invia Liberty logs the On/Off times, the pressure setting and the mode (constant
or intermittent). In order to view this data, press the buttons [
simultaneously.
List
30 seconds after the last button has been pressed, the Invia Liberty switches
into the administrative mode automatically. After another 30 seconds, the patient
mode is reactivated.
14
EN
]. You can always enter the administrative mode (in both standby and running
hold and press
hold and press
press at the
same time
Graph
] and then pressing
change
or
pressure
change
or
pressure
], and [ ]